Cartridge  
5183-5283  Return kit - For returning defective large format printer ink systems - Includes box and instructions     

Cleaning Supplies  
C6247A  DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags       
 
Hardware Kit  
C4704-60095  Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips       
C7769-60405  Hardware kit - Includes various screws and nuts for the stand and touch screen assembly       
C7770-60018  Hardware kit for printer stand - Includes screwdriver and screws       

Maintenance Kit  
C7769-60394  Maintenance Kit - Contains lubricant, gloves, cotton wipe, spring tensioner, foams, tubes, belt, encoder strip,
setup pens, trailing cable, service station, cutter, and carriage - For use with the 24-inch DesignJet 500/800 Plotters       
C7770-60287  Preventive Maintenance Kit - Includes idler pulley, spring tensioner, carriage base, service station, cutter, setup assembly, belt, encoder strip and RIDs assembly - For use with the 42-inch Designjet 500/800 plotters

Nameplate/Logo  
C4713-00013   meplate - DesignJet 430 logo
 
Recovery Kit  
5183-5268  Ink system return kit (box and instructions) - For returning Scitex Latex printheads     
5183-5269  Ink system return kit (box and instructions) - For returning Scitex Latex ink cartridges     
5184-2833  Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions       
 
Upgrade Kit  
C4718A  Color upgrade kit - Includes ink cartridges, firmware SIMM, driver software, carriage label, front panel overlay, and instructions - Adds color capabilities to the DesignJet 430

Belt  
C4705-60082  Carriage belt (D-size) - Long/wide belt attached to the carriage       
C4706-60082  Carriage belt (E-size) - Long/wide belt attached to the carriage       
C7769-60182  Carriage belt - Drives the carriage assembly - For use with 24-inch plotters       
C7769-60392  Carriage belt (24-inch)       
C7770-60014  Carriage Belt - Drives the carriage assembly - For use with 42-inch plotters       
 
Bracket/Guide  
C7769-60409  Bracket kit - Includes the left cutter guide bracket and left encoder holder       
 
Bushing  
C7769-60169  Cutter bushing       
 
Cable  
C4713-60181  Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long       
 
Cable Kit  
C7769-60305  Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For use with 24-inch plotters,   
C7770-60274  Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, mounting clips, and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models       
 
Carriage  
C4713-69039  Pen carriage assembly - Includes PC board, line sensor, carriage height gauge, carriage bushings and instructions
C7769-69376  Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor

Cover  
C4713-40038  Carriage top cover     
C4713-40053  Carriage ink cartridge slot cover     
C7769-60406  Cover kit for drive roller encoder sensor       
 
Cutter  
C4713-60040  Cutter assembly - Mounts on carriage slide rod to the right of the carriage     
C7769-60390  Cutter assembly       
 
Guide  
C7769-60179  Cutter guide - Guide bar for the cutter assembly - For 24-inch plotters       
C7770-60322  Cutter guide - Guide bar for the cutter assembly - For 42-inch plotters       
 
Label  
C3178-00030  Carriage label - Shows ink cartridge location       
C4713-00042  Carriage label - Shows ink cartridge location       
 
Motor  
C4713-60092  Carriage motor assembly - Includes cable     
C7769-60375  Carriage (scan-axis) motor assembly - Includes cable       
 
Strip  
C4713-60098  Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring       
C4714-60098  Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring       
C6069-40001  Capping strips (D-size) - Two strips s p together on the ends of the bin arms - Package contains two strips 
C7769-60183  Encoder strip (24-inch)       
C7770-60013  Encoder strip - For use with 42-inch plotters

Keycap  
C4713-40046  Power switch button/keycap     
 
Module  
C4713-69203  Electronics module - Contains power supply, main logic board, interface connectors, and fan       
C7779-60263  Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan
C7779-69263  Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan
J3265-69001  Exter l JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
 
PC Board  
C7769-60385  Interconnect PC board - Installed in right-side of printer       
C7769-69441  HP-GL/2 and RTL formatter PC board Part C7769-69441 is no longer supplied. Please order the replacement, CH336-67001   
Q1277-60001  Power supply/motor driver board       
Q6713-60001  Main elelectronics board - For the Designjet 820MFP/T1100MFP/T1200MFP/T1200MFP HD printer series and the Designjet 4520/4500 scanner series

PC Board (Interface)  
J4167-69001  JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors
Q1277-60004  Interface board       
 
Power Supply  
C7769-60387  Power supply assembly - Includes power switch       

Control Panel  
C7769-60382  Control panel assembly - Includes ribbon cable       
 
Cover  
C4713-00011  SIMM plate cover       
C4713-40029  Left end cover     
C4713-40042  Primer cover     
C4713-60014  Top cover assembly (D-size)     
C4713-60030  Right end cover     
C4713-60097  Back cover assembly (D-size)     
C4714-60014  Top cover assembly (E-size)     
C4714-60097  Back cover assembly (E-size)     
C7769-60154  Top cover assembly (Gray) - For the 24-inch Designjet 500 printer series       
C7769-60159  Right side cover (Gray) - For the Designjet 500 printer series only       
C7769-60413  Left end cover and EIO cover - White plastic cover on left side       
C7770-60154  Top cover assembly (Gray) - For the 42-inch Designjet 500 printer series       
C7779-60159  Right side cover (Black) - For the Designjet 800 printer series only       
C7779-60267  Left end cover and EIO cover - Black in color for use on Model 800       
C7780-60154  Top cover assembly (Black) - For the 42-inch Designjet 800 printer series       
 
Front Panel  
C4713-60091  Front panel assembly - Complete     
 
PC Board  
CQ654-67008  Panel PC board - Composed of the LCD controller, touch screen, and inverter board       

Memory (DIMM)  
1818-8505  64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module     
C7779-60269  64MB SO-DIMM memory module - Can be installed ONLY into the formatter board       
C7779-60270  128MB SO-DIMM memory module - Can be installed ONLY into the formatter board       
 
Memory (SIMM)  
1818-5624  4MB, 70nS DRAM SIMM memory module     
D2297-69001  16MB, 70nS, 36-bit SIMM memory module     
D2975-69001  8MB, 70nS, 36-bit parity SIMM memory module     
D3577-69001  8MB, 70nS, 36-bit parity SIMM memory module     
D3578-69001  32MB, 70nS, 36-bit parity SIMM memory module       
 
Printhead  
C4810A  HP 11 Black Printhead       
C4811A  HP 11 Cyan Printhead       
C4812A  HP 11 Magenta Printhead       
C4813A  HP 11 Yellow Printhead       
C7769-60164  Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads       
 
Bail  
C4713-60093  Bail assembly (D-size) - Has star wheel assemblies attached     
C4714-60093  Bail assembly (E-size) - Has star wheel assemblies attached     
 
Bracket  
C1633-40038  Left bail bracket     
C4713-40017  Right encoder bracket - Holds right end of encoder strip     
C7769-60391  Service station bracket - Installed on right-side of service station       
 
Bushing  
C1633-40082  Pincharm spring retaining bushing       
 
Cable  
C4713-60182  Flexible stranded wire cable - 12.5cm (4.9in) long     
 
Cable (Interface)  
C2951A  IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long Part C2951A is no longer supplied. Please order the replacement, 5063-1257   
 
Cable Kit  
C7769-60298  Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long
C7770-60267  Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 2.0m (6.5ft) long
 
Cam  
C2847-20005  Pinch arm bar cam (D-size) - Long rod from left to right side of printer - Used to lift the pinch arms       
C3190-40020 Bail lift cam - Mounted behind the bail engaging lever support     
 
Clutch  
C4713-60129  Overdrive clutch assembly - Small, wide gear near overdrive gear - Held in place with a retaining E-ring     
 
Deflector  
C4713-60117  Media deflector with media button - The media deflector furthest to the right side - Includes media load button
C7769-60283  Media deflector kit - Kit includes three deflectors       
 
End Cap  
C3174-40011  Spindle end cap (2-inch)
 
Extension  
C4713-60038  Media extension kit - Includes three extensions       
 
Fan  
C7769-60407  Vacuum fan assembly       
 
Gear  
C1633-40019  Overdrive gear cluster       
C1633-40027  Bail engaging lever gear     
C3190-40019  Bail lift cam gear     
 
Gear Assembly  
C7769-60408  Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller       
 
Guide  
C4713-60184  Rollfeed guide kit - Left and right guides mounted under printer - Used to attach rollfeed housings to the printer
C7770-60290  Tube guide - Black plastic guide that ink tube system sits in - For use with 42-inch plotters       
 
Handle  
C4713-40025  Pinchwheel manual lift handle - Paper loading lever     
 
Hub  
C6071-60172  Spindle hub kit (Small size) - Includes two small hubs and installation guide - (for Chi  ONLY)     
 
Ink Tubes Assembly  
C7769-60381  Ink tubes assembly - Includes 4 ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and 4 setup pens - For the 24-inch Designjet 500/800 printer series
C7770-60286  Ink tubes assembly - Includes four ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and four setup pens - For use with the 42-inch Designjet 500/800 printer series

Lever  
C4713-60116  Right cam jour l assembly - Two levers and a metal rod     
 
Lifter  
C7769-60181  Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pincharm lever, pincharm lever bushing
C7770-60015  Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing

Motor  
C7769-60377  Paper axis motor assembly - Includes cables       
 
Mount Kit  
C7769-60380  Rollfeed mount kit - Includes left and right housing       
 
Pincharm  
C4699-60081  Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
C7769-60175  Pincharm assembly with wheels       
 
Platen  
C4713-60114  Entry platen assembly (D-size) - Curved cover/guide that is next to the paper drive (platen) roller     
C4714-60114  Entry platen assembly (E-size) - Curved cover/guide that is next to the paper drive (platen) roller     
C7769-60174  Front platen kit - Includes platens for both the 24-inch and the 42-inch models       
C7769-60410  Back platen assembly - Curved cover/guide that is installed below the paper drive roller -24-inch plotters,
C7770-60303  Back platen assembly - Curved cover/guide that is installed below the paper drive roller -42-inch plotters  
 
Primer  
C4713-60023  Primer assembly - Mounted on left side of plotter     
 
Pulley  
C3190-60132  Idler pulley - For main drive belt - On left end of plotter - Includes pulley, shaft and spacer       
 
Roller  
C4699-60042  Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder       
C4700-60042  Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder       
C4713-60115  Overdrive roller assembly (D-size) - Includes overdrive shaft with rollers, overdrive housing, media deflector without media button, and media deflector with media button
C4714-60115  Overdrive roller assembly (E-size) - Includes overdrive shaft with rollers, overdrive housing, 2 media deflectors without media button, and media deflector with media button
C7769-60412  Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters
C7770-60289  Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 42-inch plotters
 
Rollfeed Assembly  
C4704-60199  Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs
C4714-60146  E/A0 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screws       
C4717A  D/A1 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screws     
 
Sensor  
C4713-60034  Pincharm sensor assembly     
C7769-60378  Pincharm sensor - Installed in right front of print chassis       
C7769-60379  Media sensor - Installed in the front of the rear platen       
C7769-60384  Drive roller encoder sensor       
 
Service Station  
C3190-60142  Service station assembly       
C7769-60374  Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer,  

Spindle  
C4717-60005  D/A1 rollfeed spindle rod assembly - Includes spindle and hubs       
C4719-60005  E/A0 rollfeed spindle rod assembly - Includes spindle, hubs, and end caps       
 
Spindle Kit  
C2389A  24-inch rollfeed spindle rod assembly for DesignJet 500/510/800 series - Includes spindle, hubs, and end caps Part C2389A is no longer supplied. Please order the replacement, C7769-60242
C6238A  D/A1 rollfeed spindle rod assembly for DesignJet 4xx Series - Includes spindle, hubs, and end caps       
C6239A  E/A0 rollfeed spindle rod assembly for DesignJet 4xx Series - Includes spindle, hubs, and end caps       
C7769-60242  24-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps       
C7769-60243  42-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps       
 
Spittoon  
C4713-60017  Spittoon assembly - Contains absorbers which hold excess ink from cartridges     
C7769-60165  Left spittoon assembly - Contains absorbers which hold excess ink from printheads       
 
Spring  
07575-80012  Bail gear support 'claw' spring - Attached between the bail engaging lever support and the bail gear assembly
C1633-80005  Compression spring - Installed between pincharm assembly and bushing       
C3190-80013  Bail cable spring       
C4713-80003  Pincharm spring     
 
Starwheel  
C4713-60035  Starwheel mount assembly - Includes cover, body, spring and two starwheels     
 
Strip  
C4704-40070  Capping strips ( E-size) - Two strips that s p together on the ends of the bin arms       
 
Support  
C3190-40021  Bail gear support     
C4714-60147  Media bin support (E-size)       
 
Tensioner  
C7769-60176 Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket       
C7769-60393  Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket     

Bin  
C4713-60147  Media bin arm (Loop assembly)       
C7780-60002  Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs Part C7780-60002 is no longer supplied. Please order the replacement, CH337-67003
C7781-60007  Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs - For 24-inch plotters Part C7781-60007 is no longer supplied. Please order the replacement, CH336-67013,   
 
Brace  
C7769-60219  Foot brace assembly - For use with 24-inch plotters       
C7770-60031  Foot brace assembly - For use with 42-inch plottersn Part C7770-60031 is no longer supplied. Please order the replacement, CH337-67003   
 
Cross-Brace  
C4704-60077  Cross-brace (E-size) - Brace that connects and supports the two stand legs       
C6069-60002  Cross-brace (D-size) - Brace that connects and supports the two stand legs       
C7781-60004  Cross-brace - Brace that connects and supports the two stand legs - For use with 24-inch plotters Part C7781-60004 is no longer supplied. Please order the replacement, CH336-67013   
 
Foot  
C4704-60086  Foot assembly (includes casters) - Mounts to the bottom of the plotter stand legs (two used)       
C7769-60411  Foot kit - Contains four rubber feet for bottom of plotter - For the DesignJet 500/510/800 printer seriesPart C7769-60411 is no longer supplied. Please order the replacement, CH336-67013,   
C7770-60022  Foot assembly (includes casters) - Mounts to the bottom of the left and right printer stand legs (two used) 
 
Leg  
C4704-60075 Leg assembly - Side support for the plotter - Does NOT include the foot assembly       
C7770-60021  Leg assembly - Side support for the printer - Does NOT include the foot assembly       
 
Stand  
C6069A  HP DesignJet Stand (D/A1) - Includes legs, casters, brace, wire form paper deflector, and media bin - For D/A1 size DesignJets     
C6070A  HP DesignJet Stand (D/A1) - Includes legs, casters, brace, wire form paper deflector, and media bin - For E/A0 size DesignJets       
CH337-67003  Stand assembly - For use with 42-inch plotters

HP DesignJet 820 MFP Q6685A Plotter Ersatzteile

 

Hier finden Sie uns, Lageplan
Drucker Service Arfert und Loose GbR
Bahrenfelder Chaussee 101
22761 Hamburg

Mail: info@edvdrucker.de
Tel: 040 / 57 50 35
Fax: 040 / 57 70 64
Montag bis Freitag von 8.00 bis 18.00 Uhr

Drucker Service Arfert und Loose GbR, Bahrenfelder Chaussee 101, 22761 Hamburg
© Copyright 1999 Arfert und Loose GbR. Alle Rechte vorbehalten

Drucker Service Arfert und Loose GbR

Tel: 040 / 57 50 35

Fax: 040 / 57 70 64

Drucker und HP DesignJet Plotter Dienstleistungen

Brother, Canon, Epson, Fujitsu, HP, Kyocera, Lexmark, Minolta, NEC, Oki, Philips, QMS, Samsung, Seikosha, Siemens, usw.