Belt, Zahnriemen, Antriebsriemen
C7769-60182 Carriage Belt - Long Belt Attached to the Carriage

Bin
C7782-60001 Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs

Brace
C7769-60219 Foot brace

Bracket
C7769-60156 Service Station Bracket - Installed on right-side of service station

Bracket/Guide
C7769-60170 Left cutter guide bracket and left encoder holder kit

Bushing
C7769-60169 Cutter bushing

Cable, Kabel
8120-8485 Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector, 1.8m (6.0 ft) long

Cable Kit, Kabel
C7769-60180 Interconnect Cable - the Main Wiring Harness From the Electronics Module to Many Other Locations
C7769-60295 Trailing Cable - from Electronics Module to Carriage Assembly 24"

Carriage, Schlitten, Druck Kopf Wagen
C7769-60272 Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor

Control Panel, Bedienfeld
C7769-60161 Control panel assembly - Includes ribbon cable and english overlay marked with 'Menu', 'Back', 'Enter', 'Cancel', and 'Form feed and cut'

Cover
C7769-60154 Top cover assembly (Gray)
C7769-60158 Left end cover and EIO cover (Gray)
C7769-60159 Right end cover (Gray)
C7769-60171 Cover kit for drive roller encoder sensor

Cross-Brace
C7781-60004 Cross-brace - Main structure that extends between stand legs

Cutter, Messer
C7769-60163 Cutter assembly

Deflector Kit
C7769-60283 Media Deflector Kit - Installed in Front of Pinch-Wheels - Kit Includes 3 Deflectors - Only 2 Will be Used

Fan, Lüfter
C7769-60150 Vacuum fan assembly - Installed under the main printer chassis
The Aerosol Fan is Part of the Service Station Assembly

Foot
C7770-60022 Foot Assembly (Includes Casters) - Mounts to the Bottom of Left and Right Printer Stand Legs (2 Used)

Gear Assembly, Zahnrad
C7769-60177 Paper Drive Transmission Gear Kit - Includes 2 Gears Used to Drive the Paper Drive Roller (P/O Drive Roller Kit)

Guide
C7769-60179 Cutter Guide - Long Rail Installed Near the Pinch-Wheels

Hardware Kit
C7770-60018 Hardware Kit - Used to Assemble Printer Stand - Includes Screw Driver and Screws

Ink Supply Station, Pumpen Station, Patronen Halter
C7769-60148 Ink Supply Station (ISS) - Installed in Right Side of Printer - Includes Ink Pump Motor, Pump Sensor, Out-of-Ink Sensors, and Absorber for Ink Leaks Within the ISS

Ink Tubes Assembly, Schlauch System, Tinten Schläuche
C7769-60256 Ink tubes assembly - Includes 4 ink tubes complete with hardware assemblies at both ends (Carriage crane and ink supply station crane), and 4 setup pens

Leg
C7770-60021 Leg Assembly - Side Support for the Printer (2 Used) - Does NOT Include the Foot Assembly

Lifter, Blauer Hebel, Papier Hebel
C7769-60181 Pincharm Lift Mechanism - Includes Cam (a long bar), Cam Bushings, Pincharm Lever, Pincharm Lever Bushing

Memory (DIMM)
C7769-60244 64MB SO-DIMM memory module - Can be Installed ONLY into the Formatter Board
C7769-60245 128MB SO-DIMM memory module - Can be Installed ONLY into the Formatter Board

Memory (Product)
C2387A 64MB SO-DIMM Memory Module for DesignJet 500 or DesignJet 800 - Can be Installed ONLY into the Formatter Board (the Formatter Board is Optional for DesignJet 500/500PS and Standard for DesignJet 800/800PS)
C2388A 128MB SO-DIMM Memory Module for DesignJet 500 or DesignJet 800 - Can be Installed ONLY into the Formatter Board (the Formatter Board is Optional for DesignJet 500/500PS and Standard for DesignJet 800/800PS)

Module, Mainboard
C7779-69144 Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan REQUIRES RETURN OF DEFECTIVE PART(New part = C7779-60144)

Motor
C7769-60146 Carriage (scan-axis) motor assembly - Includes cable
C7769-60152 Paper-Axis Motor Assembly - Includes Cables

Mount Kit, Spindel Halterung
C7769-60162 Rollfeed mount kit - Includes left and right housing

PC Board, Elektronik Boards, HPGL Karte
C7769-60173 Interconnect PC board - Installed in right-side of printer
C7769-69260 HP-GL/2 and RTL Formatter PC Board (C7772A) - Plugs into EIO Card Slot REQUIRES RETURN OF DEFECTIVE PART(New part = C7769-60260)

Pincharm
C7769-60175 Pincharm Assembly With Wheels (3 Used)

Platen, Walze
C7769-60155 Back Platen Assembly - Curved cover/guide that is installed below the paper drive roller
C7769-60174 Front Platen Kit - Includes platens for both the 24 inch and the 42 inch models

Power Supply, Netzteil
C7769-60145 Power supply assembly - Includes power switch

Roller
C7769-60276 Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets
Pinchwheels are Part of the Pincharm Assemblies

Sensor
C7769-60168 Media sensor - Installed in the front of the rear platen
C7769-60172 Drive roller encoder sensor - Installed on left end of paper drive roller
C7769-60194 Pincharm sensor - Installed in right front of print chassis
The Carriage Position Sensor is Part of the Carriage Assembly The Ink Pump Sensor is Part of the Ink Supply Station The Line Sensor is Part of the Carriage Assembly The Out-of-Ink Sensors are Part of the Ink Supply Station

Service Station, Reinigungs Station
C7769-60149 Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in Right Side of Printer

Spindle Kit, Achse für Rollen Papier
C2389A Rollfeed Spindle Rod Assembly - Includes Spindle, Hubs, and End Caps
C7769-60242 Rollfeed Spindle Rod Assembly - Includes Spindle, Hubs, and End Caps (C2389A)

Spittoon, Resttintenbehälter
C7769-60165 Left spittoon assembly - Contains absorbers which hold excess ink from printheads
The Right Spittoon is Part of the Service Station Assembly

Stand
C7782A Optio l Printer Stand and Media Bin Kit (Flint Gray)

Strip, Encoder
C7769-60183 Encoder Strip - Connects from Left to Right Side of Printer

Tensioner, Halterung für Umlenkrolle
C7769-60176 Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket

Upgrade Kit
C7772A Formatter Upgrade Kit - Adds HP-GL/2 and RTL Support and a a Slot for an Additio l Memory Module - Plugs into an EIO Card Slot

HP DesignJet 500 C7769B Plotter Ersatzteile

 

Hier finden Sie uns, Lageplan
Drucker Service Arfert und Loose GbR
Bahrenfelder Chaussee 101
22761 Hamburg

Mail: info@edvdrucker.de
Tel: 040 / 57 50 35
Fax: 040 / 57 70 64
Montag bis Freitag von 8.00 bis 18.00 Uhr

Drucker Service Arfert und Loose GbR, Bahrenfelder Chaussee 101, 22761 Hamburg
© Copyright 1999 Arfert und Loose GbR. Alle Rechte vorbehalten

Drucker Service Arfert und Loose GbR

Tel: 040 / 57 50 35

Fax: 040 / 57 70 64

Drucker und HP DesignJet Plotter Dienstleistungen

Brother, Canon, Epson, Fujitsu, HP, Kyocera, Lexmark, Minolta, NEC, Oki, Philips, QMS, Samsung, Seikosha, Siemens, usw.